1
EXO
Instruction Manual
Ceramic Electric Radiator
PLEASE READ AND SAVE THESE INSTRUCTIONS
2
Safety Instructions
Page 3
Installation Instructions
Page 4-6
Operation
Page 7-16
Manual Control
Page 8-11
Setting time and Date
Page 9
Setting the Timer
Page 10
Additional Functions
Page 11
Connecting to WiFi
Page 12-13
Using the App
Page 14-15
Factory Reset, High and Low Alarm, Maintenance
Page 16
Power Consumption and Disposal
Page 16 - 17
Contents
3
CAUTION - Some parts of this product can become very hot which could cause burns. Particular attention has to be
given where children and vulnerable people are present.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied person.
The heater must not be located immediately below an electrical socket-outlet.
This product is IX0 rated and must not be used in a bathroom or near water.,
Do not cover this Radiator
Keep Radiator away from ammable objects such as curtains and textiles.
Regarding the instructions for xed installation, refer to page 4.
Means for disconnection having a contact separation in all poles must be incorporated in the xed wiring in accordance
with the wiring rules.
• ELECTRICAL CONNECTION
• Your heater must only be installed in a xed position in accordance with the applicable regulations.
• Indoor use only
• This installation must be done by a qualied electrician to avoid any danger.
If you are unsure regarding the installation of this product, we suggest that you to contact a professional electrician for
assistance.
Safety Instructions
4
Mounting the heater
Make sure clearances shown below (on Fig1) are adhered to.
1. Use the screws, dowels and brackets supplied by the manufacturer.
2. For drilling dimensions, see the drilling template.
3. Read the instructions for the steps on the installation as shown on the next page.
Caution: Before switching on make sure the radiator is correctly xed to the wall.
Fig
5
6
II / Technical specications
Power supply: 230V~ 50Hz
Power: 1000W, 1500W, 2000W
Power supply: 230V~ 50Hz
- Temperature is ajustable by +/- 0.5°C
- Temperature range setting: 7°C to 30°C
7
Operation
Icon Description Icon Description
Time Sensor Mode
Week (1 to 7) Low Surface Temperature
Program (P1 to P7) Pilot Wire Mode
Temperature Display Open Window
Comfort Mode Child lock (Except Mechanical
power switch on the back )
Eco Mode Heating Icon
Anti Frost Mode Comfort Mode (0 to 24h)
Timer Mode Eco Mode (0 to 24h)
Power on/off button
Mode button
Increase temperature / time
Decrease temperature / time
8
Comfort mode
• The default Eco temperature is 19C .
• When programming the heater, comfort mode is when the heater will be on.
• If presence detection is enabled. When the room is occupied, the radiator is in comfort mode.
Eco mode
• The default Eco temperature is 15.5C .
• When programming the heater, the off period will be Eco mode. Eco mode is designed to maintain a low
level of heat in the room.
• The default Eco temperature is 15.5C .
The temperature for ECO and Reduced mode can be changed. To adjust the temperature press + or -.
Anti Frost Mode
• Frost mode protects the room by activating the heater if the temperature drops below 7C.
• The Anti Frost temperature can not be changed.
Pilot wire mode
Used if the radiator is controlled by an external controller.
In Pilot wire mode, 6 modes are available: (1) Comfort, (2) Comfort-1, (3) Comfort-2, (4) Economic, 5) Anti-
Frost (6) Power off.
Timer Mode
If its the rst time using the radiator or if the radiator has been powered off for a long period (more than 2
hours) you will need to set the current the time and day again. (Unless connected to WiFi)
Note: If programming the via WiFi, the current time and day don’t need to be set.
Manual Control (Without WiFi)
When using, ensure the Radiator is switched on.
Press ON / OFF (on control panel) button to turn the radiator on or off.
To select a mode, Press the button,
9
Setting the Time and Day
Tap until the timer icon
appears. Then hold for
5 seconds. The hour digits will
icker. (As shown Below)
Press + and - to set the minute. Then to
continue setting the day of the week.
(After 30 seconds without input it
automaticity proceeds)
Press + or - to set the hour. Press to
continue to setting the minute. (After 30
seconds without input it automaticity
proceeds to the minute. )
Press + and - to set the day.
( 1 = Monday, 2 = Tuesday etc)
Press and the heater will switch to P
Settings. Where the timer can be set.
See next page for how to set the timer
10
Setting the Timer
Follow the steps for setting the time until you see the below display.
P1 Indicates which day is
being programmed.
P1= Monday
P2=Tuesday
P3=Wednesday
P4=Thursday
P5=Friday
P6=Saturday
P7=Sunday
The 00 is the hour that is
being programmed.
The heater starts at 00 for
midnight, 01 for 1 o’clock
and so forth.
This bar shows if the heater
is set to the Eco or Comfort
mode.
• 1 bar = Eco
• 2 bars = Comfort
The + and - are used to set the either the comfort mode or reduced.
The timer is programmed by setting each hour of the week to either
comfort or reduced mode.
• The above image is where you start to programme the timer.
• To get to this stage, you need to go through the steps for setting the time and day.
1. The time begins at P1 00 for Monday Midnight.
2. Press either the + (comfort) or the - (ECO) to assign a mode for that hour.
3. After pressing + or - the timer moves onto the next hour.
4. Do this until you arrive back at 00 (Midnight.)
5. After setting each hour press To move from P1 P2 for Tuesday.
6. Press either the + (comfort) or the - (ECO) to assign a mode to each hour of the day.
7. After setting each hour press To move from P1 P2 for Tuesday.
8. Repeat these steps for P3 - P7.
11
• Sensor Mode
This mode will activate the radiator’s presence detection system. If the room is unoccupied, the radiator will
automatically shift to Anti Frost mode. The time needed to activate the presence detection can be set to
“0”, “15”, “30”, “45” and “60” minutes.
• Child Lock
The CHILD LOCK function can be used to prevent unauthorised control. To activate the screen lock, press +
and - buttons simultaneously for 5 seconds until you see the lock icon. To release the lock function, press +
and - at the same time until the lock disappears.
Internal Set up and functions
In standby mode, press + for 5 seconds to enter internal setup page. Press to cycle though the menu,
Press + or - to modify. Press to conrm.
F0 = Temperature Calibration
Press + and - change the detected room temperature. Adjustment range Range is +/-5 C
F1 = Sensor Function
Select the time needed to before sensor mode turns the heater to Eco mode:
Press + or - to pick “0”, “15”, “30”, “45”, “60” minutes.
F2 = Open Window Detection (OWD)
OWD will turn the heater to anti frost mode is a door or window is open. The time the heater is off for can be
set by pressing the + button. 0, 60 or 90 minutes are available.
OWD is activated when the room temperature suddenly drops 2C in ve minutes, it switches the radiator
Anti Frost mode.
F3 = Low Surface Temperature
Press + or - to select the surface temperature option. There are 6 options: “H0”, “H1”, “H2”, “H3”, “H4”, “H5”.
F4 = WiFi function.
Press + or - to turn the heater’s WiFi on or off.
Additional Functions
12
Connecting to WiFi
Before connecting ensure that the heater’s WiFi is turned on.
• Press to put the radiator into standby mode. Then hold down for 5 seconds to enter the settings
menu.
• Press to skip through the settings until F4 appears on the screen, followed by the current setting.
Default is “oF” – disabled.
• Use the + and - keys to adjust. Select “oN” to enable and “oF” to disable.
• Press to conrm and move onto the next setting.
1 Download the App.
The radiator is designed to work with the Smart Life app.
Scan the code below to go to the app. Press install and follow the app’s instructions to create an account.
2 Connect to App.
Ensure the Radiator’s WiFi is enabled. This is indicated by the ashing icon.
To active pairing mode. Put the heater into stand by. Then hold until the display changes to the connection
screen. The connection screen will start a 180 second countdown, giving you 3 minutes to connect.
• On the home page of the app, press + or add device.
• Select auto scan from the top navigation.
• The app will demonstrate that it has found the radiator. Press Next
• 6. The app will ask you to enter and conrm your WiFi password.
13
• The app will demonstrate that it has found the radiator. Press Next
• 6. The app will ask you to enter and conrm your WiFi password.
• 7. The radiator will begin connecting. When it is successfully added, you can change the name of the
radiator or press “Done” to return to the home screen.
Troubleshooting
If the radiator does not connect on the rst attempt :
• Make sure both the radiator and your smart device are in range of your WiFi router.
• Make sure you complete the connection process in 3 minutes. If the 180 seconds has reached the end
of its count, begin the process again.
• Ensure your router has a strong internet connection.
• Ensure WiFi is enabled on the radiator.
• Ensure WiFi and Bluetooth are enabled on your smart device.
• Make sure the app has registered successfully.
• Make sure your smart device is connected to the same WiFi network as that to which you are attempting
to connect your radiator.
• Ensure you are connected to a 2.4ghz WiFi band. See instructions within the app if you are currently
connected to a 5ghz band.
• Check any local restrictions on your WiFi. WiFi networks in public places such as hotels and airports may
require extra identication steps.
14
Using the App
Home Overview
You can use the Smart Life app to control multiple
devices. All devices are displayed on the home screen
with their status.
Possible statuses:
Online: Heater will respond to app commands.
Ofine: The heater cannot be controlled by the app.
Either the heater is switched off or not communicating
with the WiFi.
Control Interface
From the home screen, press the Radiator to open the control interface.
From the control interface you can turn the radiator off /on, adjust set temperatures, choose the
heating mode, programme the timer and adjust the device’s settings.
1. Device information
2. Device name
3. Power button
4. Selected mode(comfort,eco,anti-freeze, program
or sensor mode available
5. Current selected temperature
6. Current ambient temperature
7. Temperature selector (button or scroll)
8. Timer mode
9. Device settings
15
Choose Mode
Tap the mode icon on the control interface (No 4 on the previous
page) to choose mode. The ve options correspond to the ve
modes on the control panel.
Setting the Timer
Tap the program icon on the control interface to
programme the timer.
A program consists of 24 hourly intervals for each day,
which you can set to Comfort or Eco mode.
Tap the interval to choose a mode.
Comfort (yellow bar). Eco (green bar).
Once an interval has been set, press directly below the
new interval. Then drag you nger to when the interval
should end. This will speed up the process of programming
the week.
Device Settings
Tap the icon to view and adjust the radiator’s settings. These correspond to the settings
available through the control panel.
Tap the icon for settings that relate to the radiator’s listing on the app, including its name, any
automations it is included in, and the quality of its network connection. Note – the limit function
that appears in the settings menu is not available with this model.
If Power Is Cut To The Radiator
In case of short term power failure, the last setting will be saved. The Radiator will return to the
settings before power failure when the power restored.
16
Reset to Factory Settings
To reset the Radiator, Press the button for for 10 seconds. This will restore factory settings.
High and Low Temperature Alarm
Error Code Problem
Err 1 Ambient temperature sensor is disconnected or
the ambient temperature is too low
Err2 Ambient temperature sensor is short-circuited or
the ambient temperature is too high
Maintenance
• Disconnect the Radiator and allow to cool of before attempting any maintenance.
• Clean with a soft damp cloth.
• Clean your appliance at least once a year with a vacuum cleaner to remove any dust deposits.
• Never immerse the device in water or any other liquid.
The coating ensures long term protection. To clean it, use only a neutral detergent (cleaner or non-
abrasive solvent). The thermostat housing is made of plastic, do not use solvents for maintenance.
Any repair must be carried out by the manufacturer, its representatives or by the after-sales
service.
17
Item Unit
Type of heat input, for electric storage local space heaters only
Manual heat charge control, with integrated thermostat N/A
Manual heat charge control with room and/or outdoor temperature feedback N/A
Electronic heat charge control with room and/or outdoor temperature feedback N/A
Fan assisted heat output N/A
Type of heat output/room temperature control (select one)
single stage heat output and no room temperature control [no]
Two or more manual stages, no room temperature control [no]
with mechanic thermostat room temperature control [no]
with electronic room temperature control [no]
electronic room temperature control plus day timer [no]
electronic room temperature control plus week timer [yes]
Other control options (multiple selections possible)
room temperature control, with presence detection [yes]
room temperature control, with open window detection [yes]
with distance control option [yes]
with adaptive start control [no]
with working time limitation [no]
with black bulb sensor [no]
This symbol indicates that this product contributes to the protection
of the environment by applying the WEEE Directive 2012/19/
EU. Disposal of used electrical and electronic equipment with
household waste or in the environment is prohibited. They are asked
to take them to one of the selective collection centres planned
by the local authority to ensure their recycling. You also have the
option of depositing your product at your distributor if you purchase
a product of the same type. By respecting this approach, you
contribute to the preservation of the environment.