The Adax VV20 CDH is a modern nickel / ceramic electric tower fan heater with a stylish and timeless design. It has two power settings – 1200W and 2000W. The heater can automatically rotate from side to side, and distributing the heat efficiently to the entire room. This can be controlled by the remote control which also controls power on-off and sets the timer so the heater turns itself off after an optional period from 0.5 to 7.5 hours. The tower fan heater has an elegant luminous display where you have indicators of turn on, timing, power and switch. VV20 CDH is equipped with a dust filter that can be removed and cleaned. This contributes to a better indoor air quality and avoids dust spread throughout the room. For safety and protection there is an auto-tilt cut out at 45 degrees.
The 1200W setting heats room spaces up to 15m2. The 2000W setting heats a room space up to 25m2 room space. Comes with 2 year warranty. Dimensions (height x length x depth): 810 x 250 x 250 mm.
Firstly, connect the power cord with correct power supply.
Power button (at the bottom of rear cover under the removable air filter)
Press the power button to “I” position. If you heard the sound of “didi”, the heater is ready to use.
Press the button to “0” position to turn off the heater.
Control Panel and display window
Press the “ ” key, the power indicating light will be on, the machine starts operation at
low heating power (about 1200W). Press the key again, then all the functions are
stopped and the unit goes into the condition of standby and the power indicating light
will be off.
When the product is heating with low power, touch the “ ” key, then the high power
is on, and the LED indicator will be showed as “2000W”. Press the key again, low
power is on, and the LED indicator will be showed as “1200W”.
SWING key (Oscillation)
When the unit is working, press the “ ” key, the wind will turn left or right
automatically. At the same time, the LED indicator will be on. Press the key again, the
function is stopped, and the LED light is off.
When the unit is on work, press the “ ” key and the unit goes into condition of setting
time. You can choose 0.5 – 7.5 hours. The time will be added by 0.5 hours per every press
of the key. At the same time, the display window will show the time of your setting. The
unit will turn off automatically according to your set time.
Remote control operation
Operation instruction of remote control:
- Open the battery cover at the back side of remote control, then push the cover
backwards. Insert 4x AAA batteries in the remote control in right electrode position.
- There are 4 keys on the remote control and the function is the same with the control
- Point the remote control to direction of the display window of the heater. The
signal distance is about 6M.
Cleaning and maintenance
Make sure power is off and the plug is disconnected from the socket before cleaning or
maintenance. Otherwise, it will cause you an electric shock.
1. Clean unit surface:
Clean the surface with damp cloth (or add some detergent). Do not use corrosive detergent or
solvent to clean such as Petrol, Tina etc. Do not swash unit with water.
2. Clean air filter monthly if needed.
- Remove the air filter
- Do not use chemicals for cleaning.
- Use the soft cloth to wipe the dust. If you use water for cleaning, please make sure the air filter is dry before reinstall back to the unit.
Adax Modern Electric Tower Fan Heater (VV20CH) Specifications
|Model No.||Adax VV 20 CDH Tower Fan Heater|
|Power||Low :1200W/ High: 2000W|
|Noise (dB)||50dB ˄1m distance˅|
|Product Size||246 X 256 X 807 mm|
|Net weight||4.7 kg|